OK

Shopping Cart

Your Cart is currently empty.

 
loading..
 
 
 

DT Swiss HX 531/Hope Pro 5 E-Bike Wheelset

 
Image of DT Swiss HX 531/Hope Pro 5 E-Bike Wheelset
DT Swiss HX 531/Hope Pro 5 E-Bike Wheelset
DT Swiss HX 531/Hope Pro 5 E-Bike Wheelset
 

Click on image to enlarge

DT Swiss HX 531/Hope Pro 5 E-Bike Wheelset

Wheel Size
 
 
Front Axle Type
 
 
Freehub Body
 
 
Spoke Nipples
 
 
Rim Tape
 
 
Tubeless Valves
 
 
Tubeless Sealant
 
 
£549.99
 
Add to Cart

Bespoke Hand Built eMTB Wheelset - Save £90.00 *

This is a proper E-MTB wheelset with every component specifically selected for this application

Rims - DT Swiss HX 531 - When you head into the unknown, whether on a 29er or a 27.5er, the HX 531 with its 30 mm internal width is the perfect choice. With an ideal position in the middle of the strength, to weight, to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain. 

Hubs - Hope Pro 5 E Bike Specific Boost (110/15 front/148/12 rear) - 

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of our all experience to meet and exceed the demands of current and future bike technology. 

The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. 
 
One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4.  
 
Another big update comes in an increase in the points of engagement (from 44 to 54) using a 6 pawl freehub design. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. 

Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. 
 
As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings....And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future proofing your wheels.

Completely new for the Pro 5 is the option of an e-bike specific hub that comes with a freehub tailor made for the stresses and strains of e-bike use. 

Spokes - Sapim Force black

Spoke Nipples - DT Swiss Squorx

Spoke Count - 32 hole 3 cross lacing front and rear

Complete with DT Swiss tubeless ready tape fitted

* Compared to our recommended build to the same specification